The purpose of this Master Thesis has been to investigate the possibilities for a new type of noise reduction solution that could decrease the negative effects resulting from larger traffic roads. The idea has been to construct a noise barrier with a roof ? like a tunnel placed on a road. The choice of material has been focused on transparent materials in order to lower visual intrusion and barrier effects. This project idea is called the Noise tunnel.After having investigated the current offer of noise solutions, it has been concluded that these solutions rarely provide a sufficient level of noise reduction ? at least not when government regulations of acceptable noise levels are applied.

With increased need for flexibility in timber deliveries, forest roads become an important factor. The disintegration of roads during the spring season can be avoided if it is possible to rule cutting areas to stands with good carrying capacity along roads with good carrying capacity. The goal with this work was to create a method to find the stands with high carrying capacity located near roads with high carrying capacity, and select them into a collection file. The method was based on Esri ArcGIS 9 and the tables that follow within that program. The method resulted in four different themes: 1. Collections with GYL 100 that cross the bufferzon for 0, 1, 2 and 3 class roads. Result 36 collections. 2. Collections with GYL 100 and 200 that cross the bufferzon for 0, 1, 2 and 3 class roads.

For many decades the increase in traffic volume, expansion of highways and infrastructure has lead to an increase of wildlife vehicle collisions which are unfortunately very common in many countries today. They cause great deal of material damage and even kill humans or wildlife. Measures in the form of warning signs, under- and overpasses and fencing have been implemented for a long time with the help of observation by hunters and collisions sites. However this study focuses on the moose?s perspective and the variables that, both spatially and temporally, could have an effect on why and when moose are close to certain types of roads.

En hållbar samhällsutveckling beror på tre faktorer; naturen, människan och samhället. I dagens läge vill människan minimera de påfrestningarna som miljön och omgivningen utsätts för. Det är därför viktigt att se över hur resurserna utnyttjas. Ett bra exempel på detta är att befintliga trafikleder inom tätbebyggda städer byggs över, sådana projekt kallas överdäckningar. På detta sätt skapas både byggbar yta och negativa effekter av trafikleder minskas inom tätbebyggda områden.

The purpose of this study was to increase the level of knowledge in the field of Environmental Impact Assessment (EIA) for wind power. The study includes six wind power farms in the County of Västerbotten in northern Sweden. The main questions were: What are the real dimensions of roadways and land claims for both roads and wind power turbines? How do those dimensions correlate with the dimensions stated in the EIA? Are there any differences in values of the dimensions between the wind power farms that are included in this study? The width of the roadways and the land claims for both roads and wind turbines in wind power farms were examined on site. The results from the examinations were compared with the dimensions available in the EIA for each wind power farm.

approaching Boden deals with the approaching of a city, both in a physical sense ? along the road ? and in a spiritual sense ? in mind. The physical encounter with a city is represented by the experience of the road and its surroundings, while the spiritual encounter is represented by the idea of the city that we already have, or will get, in our minds. We have in this degree project approached Boden through a thoroughly analysis of both the entrance roads and the city itself. In this degree project we are looking for ways of how to create characteristic and interesting entrance roads to a city, with Boden as an example. This demands knowledge about the problems involving entrance roads as well as the distinctive features of the city.

A storm in January 2005 felled 75 millions cubic metres of forest in South Sweden. Previous studies of wind damage in thinned stands indicated the importance of early thinnings. The risks of wind throw increased by increasing age and height of the stands. Previous studies also indicated increasing risk of wind throw along the strip roads. The aim of the present study was to investigate wind damage in Norway spruce stands in South Sweden in relation to time of the first thinning and different pattern of strip roads (width, length and direction).

The purpose of this study was to increase the level of knowledge in the field of Environmental Impact Assessment (EIA) for wind power. The study includes six wind power farms in the County of Västerbotten in northern Sweden. The main questions were: What are the real dimensions of roadways and land claims for both roads and wind power turbines? How do those dimensions correlate with the dimensions stated in the EIA? Are there any differences in values of the dimensions between the wind power farms that are included in this study? The width of the roadways and the land claims for both roads and wind turbines in wind power farms were examined on site. The results from the examinations were compared with the dimensions available in the EIA for each wind power farm.

The Swedish Transport Administration has, and manages, a database containing information of the status of road condition on all paved and governmental operated Swedish roads. The purpose of the database is to support the Pavement Management System (PMS). The PMS is used to identify sections of roads where there is a need for treatment, how to allocate resources and to get a general picture of the state of the road network condition. All major treatments should be reported which has not always been done.The road condition is measured using a number of indicators on e.g. the roads unevenness.

In this report the situation for cyclists on 2+1-roads is analysed and studied. Theseroads are often the old 13-meter roads that have been changed into 2+1 to increasethe security. Two road sections outside Motala in Sweden has been deep studiedand analysed. The different parts in the planning process show how the progressgoes. To begin with the change should be within the old 13 meters but after thepilot study was circulated for comments the result became a broadening to 13,75and 14,00 meters.

When designing roads it?s important to knowwhat loads will bedriven on it. The axles on heavy vehicles can either have super single tires ordual tires which, according to studies, damage the roads differently. The SwedishTransport Administration is developing an understanding for the character ofthese different kinds of axle and tire types on the loads induced on Swedishroads. In this thesis a field study was conducted to determine the distributionbetween axles with super single tires and axles with dual tires on heavy vehicles.A highway, a country road and a national road were investigated during thestudy.

A great deal of the nature experience we get today is from travelling along our roads, which to a large extent go through the forest landscape. This makes the forest along our roads interesting to look at from a nature experience perspective. The main idea of this work is to increase the awareness of how we are affected by the forest when we travel through it and find out how the forest should be adapted to the road environment to create a pleasant nature experience as well as increase traffic safety. 0.9 % of Sweden's total forest area (equivalent to 200 000 hectares) is in close proximity to roads. Additionally, in Sweden 440 million hours are spent behind the wheel of which a great deal probably is spent on roads surrounded by forest in some form.

Nowadays the majority of the thinnings made in Swedish forests are done by machines, harvesters and forwarders. The most common model in thinning with a harvester is strip-road operated thinning and stand-operated thinning with one intermediate passage between the strip-roads. This study is a time study with some quality follow ups on a strip-road operated thinning model, a stand-operated thinning model with one intermediate passage between the strip-roads and a stand-operated thinning model with two intermediate passages between the strip-roads. The machines in the study were a small harvester (Forestline MPM C90) and a medium sized forwarder (Timberjack 1110). The study was made in Litsnäset outside the city of Östersund in Sweden and was made during the autumn 2007. In a lodgepole pine stand six study units (0,6 ha) were thinned with the three different models, two study units per model.

Forest biomass is becoming an increasingly important source of renewable energy, and thereby the demand is increasing. There is currently 213 000 km of forest roads in Sweden that could be suitable for biomass harvesting. Harvest of biomass along forest roads both provides biomass and maintains the quality of the roads. Currently, the volume of biomass along roads can only be assessed post harvest, chipping and industry deliverance. As the decision of whether or not to harvest should preferably be based on more than experience, the TJ-method has been proposed. The TJ-method is a subjective method to quickly determine the dry matter quantity with the assessment being conducted from the roadside.

With an increased demand for biomass based energy and with development of better technique harvest biomass, new possibilities open up. With the possibility to combine traditional cleaning of road?s right of way with biomass harvesting, the work of suppressing tree vegetation could become profitable or at least decrease the road maintenance cost. However, knowledge about productivity and profitability in mechanical biomass harvesting in roads? right of ways are still limited.